- #TRIMBLE SURVEY CONTROLLER TSC2 HOW TO#
- #TRIMBLE SURVEY CONTROLLER TSC2 SOFTWARE#
- #TRIMBLE SURVEY CONTROLLER TSC2 BLUETOOTH#
When your receiver failed to reach the "PPK Fixed" state, make sure it is receiving enough satellites. The controller should now display "PPK: Fixed" together with a PDOP value. The screenshots below demonstrate this process: When it has stable reception of at least five satellites it will switch from initialization to PP Fixed mode. The receiver will show "Initialization in 14m33s" (or similar) and starts counting down. The default initialization time for 6 satellites or more is 8 minutes or 15 minutes when no more then 5 satellites are in view. When this is the case, it goes into initialization mode. Tap Start Survey to start the initialization.Īfter tapping the "Start Survey" option, the receiver will wait until there are at least five satellites in view. In the survey menu for the PPK survey style, select the "Start Survey" option to start the initialization process. Select the "PPK" survey style from the list.
Locate and tap the "PPK" option in the list of available survey styles: Tap the "Survey" icon on the main screen. You should start the survey on your survey controller before recording the first line in Hydromagic, and stop the survey controller after you finished recording the last line in Hydromagic, so there is always overlapping PPK data availble. Check for correct survey type and interval When all settings are correct, tap "Accept", "Store" and "Esc" to return to the main screen.Ĭheck the rover options. Set the logging device as "Receiver" and make sure that we log satellite data at least once a second. Make sure the survey type has been set to "PP kinematic". Make sure you are at the first screen of the three (1/3). Tap the "Rover Options" item to check the configuration of the rover.Ī screen with rover options appears. A new selection of option should be visible.
#TRIMBLE SURVEY CONTROLLER TSC2 SOFTWARE#
Tap the "Configuration" icon from the survey controller's software home screen and select "Survey Styles".Ī list of survey styles predefined on the controller should now be displayed:Ī list of available survey styles will be displayed.
#TRIMBLE SURVEY CONTROLLER TSC2 BLUETOOTH#
This information might also (partially) apply to other controllers and GNSS receiver models (like the Trimble 4700, 4800, 5700, 5800, R4, R5, R6 and R7).įirst power up your receiver and controller, and start the Trimble Survey Controller software by tapping the "Survey Controller" icon on the Windows Mobile home screen.īefore starting the survey, we want to make sure that the recording of post-processing data is enabled and the data storage interval is correct.Īlso we want to record the data on the receiver, just because we don't want to loose any data when the battery on the controller runs out, or the Bluetooth connection is dropping.
#TRIMBLE SURVEY CONTROLLER TSC2 HOW TO#
This document is a step-by-step tutorial on how to perform a PPK survey with a Trimble R8 GNSS receiver with a Trimble TSC2 controller with Trimble Survey Controller software.
How to start recording PPK survey data with a Trimble TSC2 controller
0 kommentar(er)
